Gas Tester/Gas Manometer/ Gas Install Kit

A gas install /test kit containing a Digitron DGS 10 Multi gas tester and a Digitrom PM 80 Digital Manomoter.

Digitron DGS 10 Gas Tester

DGS-10 is a hand-held gas leak detector specifically designed for HVAC applications. It pinpoints flammable gas leaks in residential and commercial applications and also verifies that the work undertaken is leak free. As the gas concentration from a leak increases so does the frequency of the flashes and ‘tic-rate’. To identify a gas leak adjust the ‘tick-rate’ back to the background level, then move the instrument to suspected areas of higher gas concentration until the leak is detected. The DGS-10 has a long, flexible gooseneck and small sensor head. Viewing the area around the leak is made easy with a unique ‘tip-light’ incorporated into the sensor head. After using the DGS-10 simply wrap its gooseneck probe around the rubber sleeve for easy storage and protection. DGS-10 is an advanced and reliable gas leak detector capable of detecting many flammable gases. Some of the gases that the DGS-10 is sensitive to acetone, alcohol, ammonia, butane, gasoline, jet fuel, hydrogen sulphide.

• Simple, adjustable ‘tic rate’ increases as the sensor tip approaches a leak
• Audible and visual ‘tic-rate’, fully adjustable
• Long 400mm gooseneck for remote access
• ‘LED-light’ illuminates the tip sensing area
• High sensitivity provides accurate detection
• Rubber boot protects instrument
• Instantaneous response time
• 9V alkaline battery
• 3.0” x 6.5” x 1.5” (77 x 170 x 40mm) size

Digitron PM 80

A digital differential manometer with selectable measurement units.

Specifically designed for engineers using twin tube connections, the PM range is ideal for soundness testing and setting up boiler differential gas pressures. Manufactured from tough ABS plastic, this water-resistant instrument is supplied with a rubber boot to provide added protection during routine use. It can be magnetically attached for ease of use, and the back lit LCD allows easy viewing of the display in poor light conditions.

The PM series is a suitable replacement for the conventional U-tube, having a fast response coupled with high accuracy and at low cost.

Specifically developed to meet the performance and cost demands of today’s HVAC professional.

Instruments are available with alternative pressure measurement units as factory set options or as a selectable option on the PM-80 which also incorporates a smoothing function.

Features:

• Specifically developed to meet the performance and cost demands of today’s HVAC professional
• Differential Input – 8mm tube connectors
• Water Resistant (IP67 rated)
• Rugged case with protective rubber boot
• Magnetic attachment or tilt stand
• Push button “Zero” and “Hold” features
• Backlit Digital Display
• Auto Power Off after 12 minutes
• 0-130 mbar measurement range
• 0.01 resolution up to 19.99 mbar, then auto switches to 0.1 resolution
• Selectable Measurement unit option
• Smoothing Function

15013